| Specification |
| Model: VRX918SP |
| Frequency Range (-10 dB): | 40 Hz - 120 Hz |
| Frequency Response (±3 dB): | 45 Hz - 100 Hz |
| Maximum Peak Output, S.P.L: | 120 dB SPL at 1m |
| LF Driver: | 1 x18 inwith neodymium-magnet |
| Nominal Impedance: | LF: 8 ohms |
| POWER(at nominal load): | 1400 Watts Peak, 700 Watts Continuous(Bridge) |
| AMP Mode: | Class D,switch power,DSP based |
| Audio Input Connector: | 2* XLR with loop through |
| Signal Processing: | DSP based, resident in Input Module |
| AC Power Operating: | 110 VAC or 220 VAC, 50/60HzAC |
| Input Connector: | PowerCon (NAC 3MPA) |
| AC Loop Through Connector: | PowerCon (NAC 3MPA) |
| Signal to Noise (20 Hz – 20 kHz, 8Ω): | > -100 dBI |
| nput Sensitivity : | 0.775mV |
| Amplifier Protection: | short circuit,over heat,over load,direct current |